- Contact Us
Hi im struggling in setting up the remote access so i can view the cameras wirelessly or wired on the internet.
I am running windows vista on my laptop and i followed the steps for the netwok setup on my DVR H.264 V0.1B_A. 4/8-CH Embedded video recorder.
This is shown on my dvr when i connect the ethernet cable from the router to the dvr.
media port 09000
ip adddess 192.168.001.223
subnet mask 225.225.225.000
DNS same as above
At This point my laptop is hardwired on the router. I dont know if wirelesslly makes a difference.
I have set up a domain name on a website and it automatically gives me the ip address. Its set to my local current location's IP address. 86.174 etc etc.
When i open IE i type in my IP address for the DVR 192.168.001.223 then a page appears but nothing is there. It says web app manager on the bar but i get a tiny icon on the top left hand corner and its blank. I followed the instructions on how to enable the active X controls but no luck.
I am a nooby here but what am i doing wrong.
I hope i have given you a good idea of whats going on becasue i have been trying for 4 days and i cant seem to find a solution.
I am using BT Business broadband fibre optic by the way. i think i have doubled posted but i thought i would add this in.
Answer by VikingTiger · Feb 25, 2011 at 07:06 AM
Since you're having problems viewing the DVR locally, I suggest you try a more DVR-specific forum, contact your vendor or contact the DVR manufacturer.
By the way, you did not specify the manufacturer of the DVR in your post above.
default gateway network/subnet mask setting you mentioned, is wrong. Substitute all occurences of "225" with "255".
Edit: I noticed I had written "default gateway" instead of netmask. I have now corrected that above.
Network-enabled thermostat? 12 Answers
Remote database access solution 1 Answer
Remote access problem with IP Camera 7 Answers