Hi im struggling in setting up the remote access so i can view the cameras wirelessly or wired on the internet. I am running windows vista on my laptop and i followed the steps for the netwok setup on my DVR H.264 V0.1B_A. 4/8-CH Embedded video recorder.
This is shown on my dvr when i connect the ethernet cable from the router to the dvr.
static media port 09000 webport 00080 ip adddess 192.168.001.223 subnet mask 225.225.225.000 gateway 192.168.001.001 DNS same as above
At This point my laptop is hardwired on the router. I dont know if wirelesslly makes a difference.
I have set up a domain name on a website and it automatically gives me the ip address. Its set to my local current location's IP address. 86.174 etc etc.
When i open IE i type in my IP address for the DVR 192.168.001.223 then a page appears but nothing is there. It says web app manager on the bar but i get a tiny icon on the top left hand corner and its blank. I followed the instructions on how to enable the active X controls but no luck.
I am a nooby here but what am i doing wrong.
I hope i have given you a good idea of whats going on becasue i have been trying for 4 days and i cant seem to find a solution.
asked Feb 24 '11 at 05:27 PM in Default
The question has been closed Mar 04 '12 at 05:42 PM by Cry Havok for the following reason:
I think you have to try another ip address because that the same ip address i was using and it did not worked if i were you i try calling tech support , hope it works
answered Mar 04 '12 at 05:11 PM