- Contact Us
I have internet conected to single port Zyxel P660RT2 ADSL Router http://www.3dnews.ru/_imgdata/img/2007/09/03/58250.jpg. (192.168.1.1)
D-Link Dir 300 wireless 4 port router (192.168.0.1) is conected to Zyxel on "IP Pool Starting Address" 192.168.1.33 (LAN port on Zyxel)
My PC is connected to D-Link Dir 300 on LAN Port and have reserved IP: 192.168.0.102
IP Address. . . . . . . . . . . . : 192.168.0.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
I've registered http://grozda.homedns.org/
Q1: What settings should be in DynDNS/My Hosts/ IP settings? - when set 192.168.1.33 (local address) it works from my PC - when set 18.104.22.168 (wan address) it opens Zyxel login page
It say: Your current location's IP address is 22.214.171.124 but router D-Link adds local address in fields above: 192.168.1.33 and this works from my PC. I am not sure it would work from outside ?
Q2: Looks like my Zyxel doesn't port forward to internal address ? My WAMP web server works on port 80 and I wont to forward external request to my web server
Answer by Cry Havok · Jan 17, 2011 at 07:06 AM
Please see this guide which covers your questions. In summary:
192.168.1.33. You may need to use a different port and a WebHop
When I try access from another PC (connected on internet) it works. So, looks like something wrong with loopback on router, but this way works.
And it is normal for you not to be able to use the hostname or public IP address from inside the network.
Answer by Grozda · Jan 17, 2011 at 06:03 PM
I disconnect D-Link Wireless for testing and connect my PC directly to LAN port of ADSL Router Zyxel P660RT2 ADSL Route. Now I have this situation:
Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.34 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1
In DHCP client table on Zyxel I have: Server 192.168.1.34
Done port forwarding for port 80:
Incoming Port(s) 80 - 80
Port Translation 80 - 80
Server IP Address 192.168.1.34
Thats all. When I try to access http://grozda.homedns.org I get login page asks for password on my Zyxel? Like it doesn't forward? When I try access from another PC (connected on internet) it works. So, looks like something wrong with loopback on router, but this way works.
I get back cables as it was before ... I just use port forfared from zyxel to Dlink (192.168.1.33) as you suggested and it start working from outside. Didn't have to use web hope or another ports ...
Answer by LaforestMark · Jun 21, 2012 at 06:38 AM
192.168.1.1 happens to be a personal Internet Protocol Address that is placed like the default IP throughout the production of wireless routers. That is the often utilized default IPs currently as well as though it is typically a thing of the wireless router factory options, it is considerably easy to change it out in line with the user’s comfort and ease with the board of the switch. The truth is, additionally it is suggested to alter it, if someone experiences connections troubles. Linksys wireless routers are usually the almost certainly to own 192.168.1.1 for their IP address.
Due to the fact 192.168.0.1 is actually a non-public IP address, many find this particular IP address getting used by many different computing devices simultaneously, across the entire world. Even so, that is primarily probable whenever the 2 machines that are having the very same Internet Protocol Address (192.168.1.1) work in individual systems. Having said that, in the event that 2 or more personal computers are employing the IP 192.168.1.1 upon a one particular computer network, then there will definitely be interaction troubles as well as the networking system won't act as it has to. It indicates that despite the fact that one could employ the exact same IP inside a number of locations, only given that the units are not operating in the identical system.
Refused Connection 1 Answer
Update Client - Installing in the router 2 Answers
Remotely Managing Router 1 Answer