Update Clients known to NOT work with DynDNS.com

One of the most common issues for our users is a bad update client. Although it should be easy to develop an update client to work with our services (If the IP address changes, send update. If not, don't send update) we know this isn't always the case.

If you know of a device that does NOT work with our services (sends abusive updates or just doesn't update at all) list it here.

asked Jul 06 '10 at 03:01 PM in Update Clients

cwidner ♦♦
519 ● 4 ● 8 ● 24

(comments are locked)

4 answers:

Belkin

F5D8233-4 - Wireless N Router

D-Link

DCS-3220 - Internet Camera with 2-Way Audio
DGL-4500
DI-514 - Wireless Cable/DSL Router
DI-604 - Ethernet Broadband Router
DIR-635 - RangeBooster N 650 Router
DIR-655
DSL-2640B - firmware version GE_1.07
WBR-2310 - RangeBooster G Router

Draytek

Vigor3300v - Multi-WAN Security Router

Linksys

BEFw11S4v4 - Wireless-B Broadband Router
WRT300N - Wireless-N Broadband Router with 4 port Switch
WRT54GS - Wireless G Broadband Router
WRT55Ag - Wireless A+G Broadband Router
WVC200 - Wireless PTZ Internet Camera with Audio
E1000 - Updates with LAN IP (courtsy of the1soulhunter)
E2000 - Wireless router, works but forced update every 90 minute
E3000 (courtesy of niska)
E4200 (based on multiple forum posts)
E4300 (before firmware 1.0.02-build 13)

NETGEAR

RP614 - 4 Port Cable/DSL Router with 10/100 Mbps Switch
Note that the RP614v2 with firmware 5.20 is reported to work
WGR614 - Wireless-G Cable/DSL Router (V1.0.2.26_51.0.59BRIC works)
WGT634U - Wireless Storage Network Router

QNap

QNAP Turbo NAS TS-219P+ - Occasionally updates with the LAN IP address. The client is listed as `ez-update-3.0.10 arm-none-linux-gnueabi [] (by Angus Mackay)`

TP-Link

MR3420 - abusive updates

Zhone

6218-I2 (unconfirmed)

Zyxel

P-2601HN-F1 (updates upon change, but does not update at a fixed interval)
P660HW-61 (V3.40(PE.11), 05/22/2006 2'026'110 - 7/20/2006 version works)

Unknown/Generic

DVR D7704HT (causes hostname to be suspended for abusive updates)

answered Jul 06 '10 at 03:10 PM

cphillips ♦♦
61 ● 1 ● 5

(comments are locked)

I can confirm the RP614V2 router DOES work, but you must apply the latest firmware update from Netgear's support site (I think it's level 5.20)

answered May 08 '11 at 05:54 PM

sshirvan
16

(comments are locked)

QNAP Turbo NAS TS-219P+ Occasionally updates with the LAN IP address. The client is listed as "ez-update-3.0.10 arm-none-linux-gnueabi [] (by Angus Mackay)"

answered Jan 28 at 12:14 AM

nicktee
1

(comments are locked)

cannot get netviewer to work from laptop anylonger this was set up to a dvr at home also 4 days ago it worked -- carlconnors dyndns.org carlc@tbaytel.net

answered Nov 25 '12 at 05:45 PM