- Contact Us
I have been searching these boards for an answer. I see a couple that refer to my situation but the answers to me are vague. I don't understand what you do exactly. Here is where I'm at and what I've done. I have my first cam good to go. I added second cam and saw that you should port forward it to a different port did that. I have cam #1 to Port 8080 cam#2 to 8081. Then it says to add port number to address, I got new address different from first and added port but no good. then I added new port to old address but no good. so I have 123456.dynsdns.tv which works fine for first cam. I added 09876.5432.10.net . Now what??
Answer by Cry Havok · Jul 12, 2012 at 03:37 PM
Otherwise, please work through this sticky and if that doesn't solve your problem edit your question to include all the information listed at the end of that guide (and please, no more fake hostnames or other information).
Port 81 on your hostname still shows as closed when I test it using the Open Port tool linked to in the sticky. Please check your port forwarding and the LAN settings of the second camera (as covered in that sticky).
If you need further help please do provide all the information requested at the end of that guide.
Answer by captbill33326 · Jul 12, 2012 at 04:24 PM
Thank you for your prompt answer. I have configured port forwarding I have configured camera DDNS setting Everything is in order When I enter the original Dyndns address I see my first cam captbill.dyndns.tv . when I enter
captbill.dyndns.tv:81 which the camera says is good to go
Device ID 00606E0025AB Device Firmware Version 0.37.2.46 Device Embeded Web UI Version 126.96.36.199 Alias Lenny Alarm Status None DDNS Status DynDns Succeed http://captbill.dyndns.tv:81
it don't connect.
Teltonika EDGE Camera with SIM Card 3 Answers
Internet access to IP Camera 5 Answers
Nas Drive and IP Camera Online 3 Answers