- Contact Us
Hello! I am all new to this so please forgive me if I ask silly questions. After a burglary at my home (I have four kids) I purchased a DVR. I have Windows XP. I checked router gateway, dns, etc. I checked DVR IP and ports and fill in the DVR with gateway, dns, etc. same as router I made port forwarding to router. I created a domain name to Dyndns, downloaded dyndns-updater and put information on DVR. Forgot to mention that I have dynamic IP from my provider, but they told me I could use static ip to local network, so I used static IP for DVR. First day, mobile view was fine. Next day and days after connect to server failed. I made no changes. What am I doing wrong? Can you help? • DynDNS hostname: thesimou.dyndns.org • The ports you have forwarded: 8000(http),7000(intercom),6000(mobile),40001(media),40002,40003 • The make, model and version of your router: SAGEM 2444 • The make, model and version of any ADSL modem or router: ? • The LAN IP address, netmask and default gateway for the device you're trying to reach: 192.168.1.8 (static), 255.255.255.0, 080.106.108.038 (but the one time I managed to connect from outside local network I didn't use the default gateway. I used the gateway 192.168.1.1 which is the LAN IP of the router). Now, I tried with the default gateway but again no luck. • The WAN IP address of the ISP connected device (modem or router) (as shown in the modem or router's management pages, not what any web site shows): 22.214.171.124 (but I used LAN IP of the router) • If you're forwarding to a hardware device (for example a DVR) the make, model and revision: http://www.ebay.co.uk/itm/CCTV-Security-H-264-16-Ch-1TB-H-264-DVD-RW-DVR-Recorder-/310325164826?pt=UK_CCTV&hash=item4840d23b1a • If you're forwarding to a computer the operating system and patch level: Windows XP (patch level??? what is this?)
Answer by RotBlitz · Aug 14, 2011 at 01:44 PM
It seems you already worked through that guide, because you're providing the information being asked for from there. Very good!
downloaded dyndns-updater and put information on DVR.
That could mean that you now have two update clients running, the one in your DVR and the software client. Never ever run more than one Update Client against a hostname, else it will soon be blocked due to abusive updates! Run either the one or the other, whatever works best and is most convenient for you.
First day, mobile view was fine. Next day and days after connect to server failed. I made no changes.
That may be the problem, not making changes! Your IP address may have changed, and your two(?) Update Clients did not work as supposed for whatever reason. Check at the website if your hostname was updated with the correct IP address. If needed, update it manually there, and check the one Update Client which should be running that it does its job right.
Your hostname currently resolves as follows:
nslookup thesimou.dyndns.org. Server: localhost Address: 127.0.0.1
Nicht autorisierte Antwort: Name: thesimou.dyndns.org Address: 126.96.36.199
But 188.8.131.52 doesn't seem to be your current IP address, because none of the mentioned ports are open,
e.g. from the Open Port tool:
An attempted connection to thesimou.dyndns.org:8000 timed out. This typically indicates that traffic to that port is being actively blocked by either a firewall or your ISP.
I didn't use the default gateway. I used the gateway 192.168.1.1 which is the LAN IP of the router).
Yes, this 192.168.1.1 is what you should configure as default gateway in the DVR as well. No idea where this bogus IP address 080.106.108.038 could be coming from.
The WAN IP address of the ISP connected device (modem or router) (as shown in the modem or router's management pages, not what any web site shows): 184.108.40.206
Hmm, this IP address is strangely related to the IP address your hostname resolves to in no way... Something is going wrong... Or is this a typo and you actually saw 192.168.150.167 instead???
Visit http://rotblitz.byethost7.com/client.php and see what IP addresses are returned as
REMOTE_ADDR and as
HTTP_X_FORWARDED_FOR. They should be the same, and also the same as shown on your router's status page, and again the same your hostname resolves to.
(but I used LAN IP of the router)
Hmm, what did you use the LAN IP address of the router for? You should use this as "default gateway" and as "DNS server" on all your devices in your LAN only, not for anything outside your LAN, e.g. not for your DynDNS hostname.
Windows XP (patch level??? what is this?)
This is e.g. the latest service pack you're using, which is SP 3 for Windows XP. And also if you have the latest MS hotfix updates installed or not.
Answer by Cry Havok · Aug 21, 2011 at 09:27 AM
If it used to work but doesn't know then it usually means one of:
Since I managed to get the message SUCCESS, that means that dyndns sends me to server / router, but I cannot be forwarded to dvr, correct? But I have made port forward for all ports...
It means that your DynDNS hostname resolves to an IP with something listening on that port. It probably means a problem with your port forwarding or DVR configuration.
The DVR should have a netmask of
255.255.255.0 and the default gateway should be
Answer by Cry Havok · Aug 22, 2011 at 06:01 AM
If you don't have Dynamic DNS Pro then you can't use
thesimou.dyndns.org, but only
thesimou.dyndns.org. Try using
http://thesimou.dyndns.org:8000/ instead (hint, that works for me).
YES, that one day that I could see my dvr I used from mobile url: thesimou.dyndns.org. I had already tried what you suggest but it is not working... Beleive me when I say I try every possible connection combination every day... (with or without http, with or without www, with or without :8000, nothing works) So, I was wondering, what If I buy Dynamic DNS Pro and still cannot manage the view???
It worked for me when I posted, though not right now. This suggests that your update client isn't behaving correctly, or you have a connectivity issue.
Remember to test:
Works again for me right now.
Answer by RotBlitz · Aug 21, 2011 at 08:15 PM
I checked the OPEN PORT TOOL you suggested. I have seen it before but I didn't understand what to do with it... What should I do?
You enter your hostname or public IP address there and one of your port numbers at a time to check if it is open and can be reached from outside. Don't be confused about the samples they give, just use your real port numbers, no matter how many digits they have.
Typing mistake... It is the same...
No, 220.127.116.11 or 192.168.150.167 is not the same as 18.104.22.168 (or 22.214.171.124 in between). Or what do you want to express here?
How do I check what is happening?
Well, the Open Port Tool now shows a better result:
thesimou.dyndns.org:8000 is open and accepting connections. This indicates the port is not being blocked by either a firewall or your ISP and is currently operational.
You should be good to go. You can only use Internet Explorer to use your device.
Answer by Ntshangase3 · Feb 20, 2012 at 09:30 PM
Hi, I just bought a DVR Zhuhai RaySharp RS-CAD-9108H and downloaded Asee and MEye program to my blackberry as instructed by manual. I need someone who can tell me step by step how to connect from blackberry to my DVR recoder and I am connected to wireless internet to my computer so how can I connect my DVR to the net? I dont know much about this unit I just bought it because there was a several breaking in my house. The Asee Settings requires 1. Title 2. Address 3. Port 4. Channel total 5. User ID 6. Password 7. Network type I dont know where and how to do this, please help me guys
Cant Access DVR over Internet 2 Answers
Can you suggest a DVR App 1 Answer
How to setup DYNDYNS in my DVR 1 Answer