- Contact Us
Hi there I'm new to NAS and FTP - hopefully someone can help... I've purchased a Dlink NAS-320, configured and started the ftp server, but I get the following problem when trying to connect using FileZilla:
Status: Resolving address of twitch0.dlinkddns.com Status: Connecting to 126.96.36.199:1025... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 10 allowed. Response: 220-Local time is now 11:53. Server port: 1025. Response: 220-This server supports FXP transfers Response: 220 You will be disconnected after 10 minutes of inactivity. Command: USER twitch0 Error: Could not connect to serverAnyone have any ideas why this is happening? I've forwarded on ports from my router to the NAS (21 and others that I'm now trying to use in passive mode) but still no joy.. Thansk in advance, Tony
Answer by magic_quotes · Jun 09, 2011 at 07:41 AM
Hi there, I've been having the same problem as Tony, I've resolved it by configuring my ftp server (DNS-320) like this : Max user: 10 idle time: 10 min port :21 Use the default port range (55536-55663) Language : UTF-8 FXP enabled passive mode disabled and enable the ports 21 and range (55536-55663) on my router (Both TCP / UDP). Hope it will help you.
Answer by vali12002 · May 03, 2012 at 09:03 PM
Hello guys I have a problem I have just buyed a NAS DLINK-320 but it seems that I have the same problem may be my its even biger because I cannot connect not even if I use net2ftp so please help I get the error: Unable to connect to FTP server 82.86.xxx.xx on port 21. and I have checked if the port 21 is open and it seems it is, So I don't know what to do more !! Please help
Answer by twitch0 · Jun 29, 2011 at 09:22 PM
Hi there, thanks for the advice. I have tried both of the above with no luck. Interestingly enough, if I use a web based service such as net2ftp it connects to the NAS ftp server fine... Any further ideas on how to fix this would be amazing!